REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A005M9P

      Engage the 2 clamps to install the rear combination light socket and wire sub-assembly as shown in the illustration.

    2. Connect the connector.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A005HC3

      Install the rear turn signal light bulb into the rear turn signal light socket.

    2. Turn the rear combination light socket and wire sub-assembly in the direction indicated by the arrow in the illustration to install it.