REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. A005K9IE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Socket and Wire Sub-assembly LH)

      Apply battery voltage to the connector and check the light comes on.

      Standard
      Tester Connection Condition

      Battery positive (+) → 1 (B)

      Battery negative (-) → 3 (E)

      		 Stop light comes on

      Battery positive (+) → 2 (TL)

      Battery negative (-) → 3 (E)

      		 Tail light comes on

      Battery positive (+) → 4 (TRN)

      Battery negative (-) → 3 (E)

      		 Turn signal light comes on

      Tech Tips

      Use a new bulb or know good one.