HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL DISCHARGE HEADLIGHT BULB


    1. Install the discharge headlight bulb.

      Note

      Do not touch the glass part of the bulb.

    2. A005H5SE02

      Lock the set spring in the direction indicated by the arrow in the illustration.

  2. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH


    1. A005IIZ

      Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly socket.

    2. A005K71

      Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow in the illustration to install it.

    3. Connect the connector.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.