HEADLIGHT ASSEMBLY REPAIR

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

  • If only the installation area of the headlight assembly is damaged, the repairs described below can be performed inexpensively by using brackets for the repair. This may only be done if the other areas of the headlight assembly are not damaged.

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY

    Click here

  3. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

    Tech Tips


    • If only the installation area of the headlight assembly is damaged, use a repair bracket for a low-cost repair.

    • Ensure that other areas of the headlight assembly are not damaged.


    1. A005KHM

      Cut off the portion indicated by the shaded portion in the illustration and smooth the surface with sandpaper.

      Tech Tips

      After cutting off the shaded portion, place the upper headlight protector retainer LH against the bosses and gradually file away the shaded portion until installation is possible.

    2. A005M7W

      Install the upper headlight protector retainer LH with the 2 screws.

  4. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

    Tech Tips


    • If only the installation area of the headlight assembly is damaged, use a repair bracket for a low-cost repair.

    • Ensure that other areas of the headlight assembly are not damaged.


    1. A005H6J

      Cut off the portion indicated by the shaded portion in the illustration and smooth the surface with sandpaper.

      Tech Tips

      After cutting off the shaded portion, place the lower headlight protector retainer LH against the bosses and gradually file away the shaded portion until installation is possible.

    2. A005INS

      Install the lower headlight protector retainer LH with the 2 screws.

  5. INSTALL LOWER HEADLIGHT BRACKET RH

    Tech Tips


    • If only the installation area of the headlight assembly is damaged, use a repair bracket for a low-cost repair.

    • Ensure that other areas of the headlight assembly are not damaged.


    1. A005L4N

      Cut off the portion indicated by the shaded portion in the illustration and smooth the surface with sandpaper.

      Tech Tips

      After cutting off the shaded portion, place the lower headlight bracket RH against the bosses and gradually file away the shaded portion until installation is possible.

    2. A005KD2

      Install the lower headlight bracket RH with the screw.

  6. INSTALL HEADLIGHT ASSEMBLY

    Click here

  7. INSTALL FRONT BUMPER COVER

    Click here

  8. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT

    Click here

  9. PREPARE FOR HEADLIGHT AIMING

    Click here

  10. INSPECT HEADLIGHT AIMING

    Click here

  11. ADJUST HEADLIGHT AIMING

    Click here