HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT MOUNTING BRACKET


    1. Engage the 2 claws and install the headlight mounting bracket.

  2. INSTALL HEADLIGHT ASSEMBLY LH


    1. Engage the claw and install the headlight assembly LH.

    2. Engage the clamp and each connector.

    3. Install the 2 screws.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT

    Click here

  5. PREPARE FOR HEADLIGHT AIMING

    Click here

  6. INSPECT HEADLIGHT AIMING

    Click here

  7. ADJUST HEADLIGHT AIMING

    Click here