HEADLIGHT DIMMER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY (w/o Rear Fog Light)


    1. A005JMG

      Using pliers, expand the clamp as shown in the illustration.

    2. A005KO5

      While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.

    3. Engage the claw.

    4. A005LSW

      Release the clamp to install the headlight dimmer switch assembly.

    5. Connect the connector.

  2. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY (w/ Rear Fog Light)


    1. A005JMG

      Using pliers, expand the clamp as shown in the illustration.

    2. A005KO5

      While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.

    3. Engage the claw.

    4. A005LWO

      Release the clamp to install the headlight dimmer switch assembly.

    5. Connect the connector.

  3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

    Click here

  4. INSTALL SPIRAL CABLE SUB-ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSPECT SRS WARNING LIGHT

    Click here