HEADLIGHT DIMMER SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (w/ Rear Fog Light)

    A005M40E49
    Text in Illustration
    *a

    Component without harness connected

    (Headlight Dimmer Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Switch Condition Specified Condition

      13 (T) - 19 (EL)

      11 (H) - 19 (EL)

      12 (A) - 19 (EL)

      		 OFF 10 kΩ or higher
      18 (TL) - 12 (EL) TAIL Below 1 Ω

      13 (T) - 19 (EL)

      20 (HU) - 19 (EL)

      		 HEAD Below 1 Ω
      12 (A) - 19 (EL)*1 AUTO Below 1 Ω
      Dimmer Switch
      Tester Connection Switch Condition Specified Condition

      14 (HF) - 19 (EL)

      20 (HU) - 19 (EL)

      		 FLASH Below 1 Ω
      15 (HL) - 19 (EL) LOW BEAM Below 1 Ω
      20 (HU) - 19 (EL) HI BEAM Below 1 Ω
      Turn Signal Switch
      Tester Connection Switch Condition Specified Condition

      16 (TR) - 19 (EL)

      18 (TL) - 19 (EL)

      		 Neutral 10 kΩ or higher
      16 (TR) - 19 (EL) Right turn Below 1 Ω
      18 (TL) - 19 (EL) Left turn Below 1 Ω
      Front Fog Light Switch
      Tester Connection Switch Condition Specified Condition
      7 (BFG) - 8 (LFG)*2 OFF 10 kΩ or higher
      7 (BFG) - 8 (LFG)*2 ON Below 1 Ω
      Rear Fog Light Switch
      Tester Connection Switch Condition Specified Condition
      2 (B) - 3 (BR) OFF 10 kΩ or higher
      2 (B) - 3 (BR) ON Below 1 Ω

      *1: w/ Automatic Light Control System

      *2: w/ Front Fog Light

  2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (w/o Rear Fog Light and w/ Automatic Light Control System)

    A005M40E15
    Text in Illustration
    *a

    Component without harness connected

    (Headlight Dimmer Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Switch Condition Specified Condition

      13 (T) - 19 (EL)

      11 (H) - 19 (EL)

      12 (A) - 19 (EL)

      		 OFF 10 kΩ or higher
      18 (TL) - 12 (EL) TAIL Below 1 Ω

      13 (T) - 19 (EL)

      20 (HU) - 19 (EL)

      		 HEAD Below 1 Ω
      12 (A) - 19 (EL) AUTO Below 1 Ω
      Dimmer Switch
      Tester Connection Switch Condition Specified Condition

      14 (HF) - 19 (EL)

      20 (HU) - 19 (EL)

      		 FLASH Below 1 Ω
      15 (HL) - 19 (EL) LOW BEAM Below 1 Ω
      20 (HU) - 19 (EL) HI BEAM Below 1 Ω
      Turn Signal Switch
      Tester Connection Switch Condition Specified Condition

      16 (TR) - 19 (EL)

      18 (TL) - 19 (EL)

      		 Neutral 10 kΩ or higher
      16 (TR) - 19 (EL) Right turn Below 1 Ω
      18 (TL) - 19 (EL) Left turn Below 1 Ω

  3. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (w/o Rear Fog Light and w/o Automatic Light Control System)

    A005MDUE06
    Text in Illustration
    *a

    Component without harness connected

    (Headlight Dimmer Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Switch Condition Specified Condition

      5 (B1) - 8 (T1)

      6 (RF) - 7 (ED)

      		 OFF 10 kΩ or higher
      5 (B1) - 8 (T1) TAIL Below 1 Ω

      5 (B1) - 8 (T1)

      6 (RF) - 7 (ED)

      		 HEAD Below 1 Ω
      Dimmer Switch
      Tester Connection Switch Condition Specified Condition

      7 (ED) - 9 (HU)

      7 (ED) - 10 (HF)

      		 FLASH Below 1 Ω
      7 (ED) - 10 (HF) LOW BEAM Below 1 Ω

      7 (ED) - 9 (HU)

      7 (ED) - 10 (HF)

      		 HI BEAM Below 1 Ω
      Turn Signal Switch
      Tester Connection Switch Condition Specified Condition

      11 (EL) - 12 (TL)

      11 (EL) - 13 (TR)

      		 Neutral 10 kΩ or higher
      11 (EL) - 13 (TR) Right turn Below 1 Ω
      11 (EL) - 12 (TL) Left turn Below 1 Ω