WASHER NOZZLE(for Front) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check where the washer fluid hits the windshield.

      A005HS7E02
      Text in Illustration
      *a Upper Limit *b Washer Fluid Spray Area
      *c Lower Limit *d 432 mm (17.00 in.)
      *e 400 mm (15.74 in.) *f 120 mm (4.72 in.)
      *g 128 mm (5.03 in.) - -
      A005L3V Specified Area - -
      OK
      Washer fluid hits the windshield in the areas as shown in the illustration.

      If the result is not as specified, replace the washer nozzle sub-assembly.