REAR WIPER RUBBER REPLACEMENT

PROCEDURE


  1. REMOVE REAR WIPER BLADE

    A005JMNE01

    1. Raise the wiper blade to the position where the claw detaches with a click sound, as shown in the illustration.

      Note

      Be careful not to damage the claw.

    2. Remove the rear wiper blade from the rear wiper arm in the direction indicated by the arrow in the illustration.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

  2. REMOVE REAR WIPER RUBBER


    1. A005KNOE02
      Text in illustration
      *1 Stopper

      Lift and pull the end of the wiper rubber protrusion from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

      Tech Tips

      Lightly pushing the rubber in the middle will allow it to be removed more easily.

    2. A005HTI

      Remove the rear wiper rubber with the 2 rear wiper rubber backing plates.

    3. Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.

  3. INSTALL REAR WIPER RUBBER

    A005H5I

    1. Install the 2 rear wiper rubber backing plates to the rear wiper rubber as shown in the illustration.

      Note

      Install the backing plates facing the correct direction.

    2. A005HARE01

      Insert the wiper rubber from the second claws of the wiper blade to the rear end claws.

    3. After pushing the wiper rubber through the rear end claws, allow it to stick out from the rear end stopper.

      Text in illustration
      *1 Second Claws
      *2 Rear End Claws
      *3 Rear End Stopper
    4. A005GLKE03
      Text in illustration
      *1 Front End Claws

      Slide the wiper rubber through the front end claws.

      Note

      Do not deform the rear wiper rubber backing plate or damage the rear wiper blade assembly claws by sliding the rear wiper rubber excessively.

      Tech Tips


      • A005IVO

        If the rear wiper blade assembly claws are not through the grooves in the rear wiper rubber, slide the rear wiper rubber back and forth several times to engage the claws.

      • Applying a small amount of washer fluid to the rear wiper rubber allows the claws to align the grooves.

      • A005JQ3

        The rear wiper rubber slide stroke is extended by lifting the center of the rear wiper rubber slightly as shown in the illustration.

  4. INSTALL REAR WIPER BLADE

    A005LWJE01

    1. Install the rear wiper blade to the wiper arm in the direction indicated by the arrow in the illustration.