OUTER REAR VIEW MIRROR INSTALLATION

PROCEDURE

1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY

   Click here

2. INSTALL OUTER MIRROR COVER

   Click here

3. INSTALL OUTER MIRROR

   Click here

4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

   
   

   1. Engage the clamp.

   2. Temporarily install the outer rear view mirror assembly with the 3 screws.

      Note

      When the outer rear view mirror assembly is reused, do not incline the screws while temporarily tightening them to prevent the screw threads from being damaged.

   3. Install the 3 screws.

      Torque:

      11 N*m  { 107 kgf*cm, 8 ft.*lbf }

   4. Connect connector.

5. INSTALL OUTER MIRROR INSTALL HOLE COVER

   

   
   

   1. Engage the guide.

   2. Engage the 4 claws and install the outer mirror install hole cover.

6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

7. INSTALL FRONT ARMREST UPPER BASE PANEL LH (for Driver Side)

   Click here

8. INSTALL FRONT ARMREST UPPER BASE PANEL RH (for Front Passenger Side)

   Tech Tips

   Use the same procedure described for the LH side Click here.