OUTER REAR VIEW MIRROR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT ARMREST UPPER BASE PANEL LH (for Driver Side)

    Click here

  2. REMOVE FRONT ARMREST UPPER BASE PANEL RH (for Front Passenger Side)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. REMOVE OUTER MIRROR INSTALL HOLE COVER

    A005M8BE02
    Text in Illustration
    *1 Protective Tape
    *a Hole Cover Marking

    1. Insert a screwdriver with its tip wrapped with protective tape, into the hole cover marking and disengage the claw A.

    2. Disengage the other 3 claws B and guide to remove the outer mirror install hole cover.

  5. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

    A005KP9

    1. Disconnect the connector.

    2. Remove the 3 screws.

    3. Disengage the clamp and remove the outer rear view mirror assembly.

  6. REMOVE OUTER MIRROR

    Click here

  7. REMOVE OUTER MIRROR COVER

    Click here

  8. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

    Click here