BACK DOOR SUPPORT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR STAY ASSEMBLY

    A005KRVE01
    Text in Illustration
    *1 Protective Tape
    *2 Stopring

    1. Using a screwdriver with its tip wrapped in protective tape, slightly raise the 2 stop rings, as shown in the illustration.

    2. Disengage the 2 ball joints and remove the back door stay assembly.

      Note


      • Do not remove the stop rings from the stay. Raise the stop rings just enough to allow the stay to be disengaged

      • Do not reuse a stop ring if it is removed from the stay.

  2. REMOVE BACK DOOR DAMPER STAY UPPER BRACKET


    1. A005LJH

      Remove the 2 bolts and the back door damper stay upper bracket.

  3. REMOVE BACK DOOR STAY BOLT


    1. A005KGA

      Remove the back door stay bolt.