REAR DOOR ADJUSTMENT

CAUTION / NOTICE / HINT

A005IQ2E04

Tech Tips

Centering bolts are used to mount the door hinge onto the vehicle body and door. The door cannot be adjusted with the centering bolts in. Substitute standard bolts (with washers) for the centering bolts when making adjustments.

Text in Illustration
*1 Centering Bolt
*2 Standard Bolt

PROCEDURE


  1. INSPECT REAR DOOR

    A005KDAE01

    1. Check that the clearance measurements are within the standard ranges.

      Standard
      Area Specified Condition Area Specified Condition
      *a

      4.2 to 7.2 mm

      (0.165 to 0.284 in.)

      		 *b

      3.4 to 6.4 mm

      (0.134 to 0.252 in.)
      *c

      4.9 to 7.4 mm

      (0.193 to 0.291 in.)

      		 *d

      2.8 to 5.8 mm

      (0.110 to 0.228 in.)
      *e

      -1.5 to 1.5 mm

      (-0.059 to 0.059 in.)

      		 *f

      -2.7 to 5.7 mm

      (-0.106 to 0224 in.)
      *g

      4.5 to 7.5 mm

      (0.177 to 0.295 in.)

      		 *h

      3.3 to 6.3 mm

      (0.130 to 0.248 in.)
      *i

      -1.5 to 1.5 mm

      (-0.059 to 0.059 in.)

      		 - -

  2. ADJUST REAR DOOR

    Note

    Make sure that the ignition switch is always LOCK or ACC during adjusting door lock strikers.


    1. A005K52

      Using SST, adjust the door horizontally and vertically by loosening the body side hinge bolts.

      SST
      09812-00010

    2. Tighten the body side hinge bolts after the adjustment.

      Torque:
      26 N*m  { 265 kgf*cm, 19 ft.*lbf }
    3. A005ISN

      Using SST, adjust the door horizontally and vertically by loosening the door side hinge bolts.

      SST
      09812-00010

    4. Tighten the door side hinge bolts after the adjustment.

      Torque:
      26 N*m  { 265 kgf*cm, 19 ft.*lbf }
    5. A005IUW

      Using a "TORX" socket wrench T40, adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }