HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements are within the standard ranges.

      A005HPHE01
      Standard
      Area Measurement Area Measurement
      *a

      2.5 to 5.5 mm

      (0.098 to 0.217 in.)

      		 *b

      4.0 to 7.7 mm

      (0.158 to 0.303 in.)
      *c

      2.3 to 5.3 mm

      (0.091 to 0.209 in.)

      		 *d

      -1.5 to 1.5 mm

      (-0.059 to 0.059 in.)
      *e

      -0.7 to 5.3 mm

      (-0.028 to 0.209 in.)

      		 *f

      20.2 to 26.2 mm

      (0.795 to 1.032 in.)