REAR WIPER MOTOR REMOVAL

PROCEDURE


  1. REMOVE BACK DOOR TRIM BOARD

    Click here

  2. REMOVE REAR WIPER ARM HEAD CAP


    1. Using the new rear wiper arm head cap:


      1. A005KLX

        Disengage the 2 claws and the 2 hinges, and remove the rear wiper arm head cap.

    2. Reusing the rear wiper arm head cap:


      1. A005H2S

        Disengage the 2 claws and open the rear wiper arm head cap as shown in the illustration.

  3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A005J0X

      Remove the nut and the rear wiper arm and blade assembly.

  4. REMOVE REAR WIPER MOTOR ASSEMBLY

    A005GT2

    1. Disconnect the connector.

    2. Loosen the 3 bolts and remove the rear wiper motor assembly.

  5. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  6. REMOVE REAR WIPER MOTOR GROMMET

    A005KBT

    1. Remove the rear wiper motor grommet.