КОНТАКТНЫЙ ДАТЧИК ДАВЛЕНИЯ МАСЛА УСИЛИТЕЛЯ РУЛЕВОГО УПРАВЛЕНИЯ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE

1. INSPECT POWER STEERING OIL PRESSURE SWITCH

   
   

   1. Check the oil pressure switch.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Engine and ECT / Data List / Power Steering Signal.

         
         Powertrain > Engine and ECT > Data List

         Tester Display
         Power Steering Signal

      5. Start the engine.

      6. Read the value displayed on the GTS.

         OK
         Condition Specified Condition Power steering operating ON Power steering not operating OFF

         If the result is not as specified, check the wire harness and connector. If the wire harness and connector are normal, replace the power steering oil pressure switch.