ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   
   1. 

      *1

      O-Ring

      Apply a light coat of engine oil to the O-ring of the sensor.

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Install the sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the sensor connector.

2. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

3. INSTALL COOLER COMPRESSOR ASSEMBLY

   Click here

4. INSTALL GENERATOR ASSEMBLY

   Click here