ПЕДАЛЬ АКСЕЛЕРАТОРА СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    Click here

  2. REMOVE ACCELERATOR PEDAL POSITION SENSOR ASSEMBLY

    Note

    This accelerator pedal does not require lubrication.

    Do not apply oil or other lubrication to the accelerator pedal position sensor assembly.

    If applied, the accelerator pedal position sensor assembly must be replaced.


    1. B001V01

      Disconnect the accelerator pedal position sensor connector.

    2. Remove the 2 nuts and accelerator pedal position sensor.