ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the park/neutral position switch connector.

    2. B001V7S

      Using a screwdriver, bend the tabs of the lock washer.

    3. B001QFX

      Remove the lock nut and lock washer.

    4. B001UFA

      Remove the bolt and park/neutral position switch assembly.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.