КОРПУС КЛАПАНОВ В СБОРЕ УСТАНОВКА

PROCEDURE

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   
   

   1. Install the spring and check ball body.

   2. 

      *1

      Pin

      Insert the pin of the manual valve into the hole of the manual valve lever.

   3. 

      Install the transmission valve body assembly with the 19 bolts.

      Torque:

      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

      Tech Tips

      Each bolt length is indicated below.

      Bolt length
      for bolt A
      32 mm (1.26 in.)
      for bolt B
      25 mm (0.984 in.)

   4. Install the detent spring and detent spring cover with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT TRANSMISSION WIRE

   Click here

3. PERFORM RESET MEMORY

   Click here