СТАРТЕР СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

    Click here

  4. REMOVE STARTER COVER


    1. B001TN8

      Remove the 3 bolts and starter cover.

  5. REMOVE STARTER ASSEMBLY


    1. B001Q85

      Remove the bolt and disconnect the ground wire.

    2. Disconnect the starter connector.

    3. Open the terminal cap.

    4. Remove the nut and bolt, and then disconnect the starter wire.

    5. B001R0D

      Remove the 2 bolts and starter.

  6. REMOVE FLYWHEEL HOUSING SIDE COVER

    B001RQG