РАДИАТОР СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE LOWER FRONT BUMPER COVER

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE FRONT BUMPER COVER

    Click here

  7. REMOVE RADIATOR SIDE DEFLECTOR RH


    1. A01A3EV

      Using a clip remover, detach the 3 claws and remove the clip and radiator side deflector RH.

  8. REMOVE RADIATOR SIDE DEFLECTOR LH


    1. A01A62E

      Using a clip remover, detach the 3 claws and remove the clip and radiator side deflector LH.

  9. REMOVE NO. 1 RADIATOR HOSE

    B001TDN

    1. Slide the 2 clamps and remove the No. 1 radiator hose from the radiator assembly and water inlet.

  10. REMOVE NO. 2 RADIATOR HOSE


    1. B001T60

      Slide the clamp and remove the No. 2 radiator hose from the water inlet.

    2. B001TM6

      Detach the clamp.

    3. Slide the clamp and remove the No. 2 radiator hose from the radiator assembly.

  11. REMOVE RADIATOR RESERVOIR ASSEMBLY


    1. B001P24

      Disconnect the reservoir hose.

    2. Remove the 3 bolts and radiator reservoir assembly.

  12. DISCONNECT OIL COOLER TUBE


    1. B001UBK

      Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.

  13. REMOVE FAN SHROUD


    1. B001PBR

      Loosen the 4 nuts holding the fluid coupling.

    2. Remove the fan and generator V belt.

      Click here

    3. B001UOE

      Remove the 2 bolts holding the fan shroud.

    4. Remove the 4 nuts of the fluid coupling, and then remove the fan shroud together with the fluid coupling.

      Note

      Be careful not to damage

    5. Remove the fan pulley from the engine water pump assembly.

  14. REMOVE RADIATOR ASSEMBLY


    1. B001RUI

      Slide the 2 clamps and remove the 2 oil cooler hoses from the radiator assembly.

    2. A01A68J

      Remove the 4 bolts and radiator assembly.

  15. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL


    1. Remove the No. 1 radiator to support seal from the radiator assembly.

  16. REMOVE NO. 2 RADIATOR TO SUPPORT SEAL


    1. Remove the No. 2 radiator to support seal from the radiator assembly.