ТЕРМОСТАТ УСТАНОВКА

Информация добавлена 08-08-2017

PROCEDURE


  1. INSTALL WATER INLET WITH THERMOSTAT


    1. Install a new gasket and the water inlet with thermostat with the 3 nuts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  2. CONNECT NO. 2 RADIATOR HOSE


    1. B001UWJC03
      *1 Paint Mark
      *2 Protrusion
      *a Front
      *b Upper

      Connect the No. 2 radiator hose so that its paint mark aligns with the water inlet housing protrusion as shown in the illustration.

      Tech Tips


      • Make sure the paint mark of the No. 2 radiator hose is facing upward.

      • Make sure the direction of the hose clamp is as shown in the illustration.

  3. ADD ENGINE COOLANT

    Click here

  4. INSPECT FOR COOLANT LEAK

    Click here

  5. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL LOWER FRONT BUMPER COVER

    Click here

  7. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  8. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here