НАСОС СИСТЕМЫ ОХЛАЖДЕНИЯ УСТАНОВКА

PROCEDURE

1. INSTALL ENGINE WATER PUMP ASSEMBLY

   
   

   1. 

      	for Bolt A
      	for Bolt B
      	for Bolt C

      Install a new gasket and the engine water pump with the 17 bolts.

      Torque:

      for bolt A

      47 N*m  { 479 kgf*cm, 35 ft.*lbf }

      for bolt B

      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

      for bolt C

      23 N*m  { 235 kgf*cm, 17 ft.*lbf }

2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

   Click here

3. INSTALL COOLER COMPRESSOR ASSEMBLY

   Click here

4. INSTALL GENERATOR ASSEMBLY

   Click here

5. CONNECT VANE PUMP ASSEMBLY

   
   

   1. Connect the vane pump with the 2 bolts.

      Torque:

      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

   2. Attach the 2 wire harness clamps and connect the connector.

6. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

   
   

   1. for Separate Type

      Install the 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates with the 2 bolts.

      Torque:

      54 N*m  { 551 kgf*cm, 40 ft.*lbf }

   2. for Integrated Type:

      Install the 2 No. 2 idler pulleys with the 2 bolts.

      Torque:

      54 N*m  { 551 kgf*cm, 40 ft.*lbf }

7. INSTALL WATER INLET HOUSING

   

   
   

   1. Install a new O-ring to the water outlet pipe.

   2. Install a new gasket to the engine water pump.

   3. Apply soapy water to the gasket of the water outlet pipe.

   4. Install the water inlet with the 5 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   5. Connect the 5 water by-pass hoses.

   6. Connect the oil cooler hose.

   7. Connect the No. 2 oil cooler hose.

   8. Connect the throttle body connector.

8. INSTALL FAN SHROUD

   Click here

9. CONNECT OIL COOLER TUBE

   Click here

10. INSTALL RADIATOR RESERVOIR ASSEMBLY

    Click here

11. INSTALL NO. 2 RADIATOR HOSE

    Click here

12. INSTALL NO. 1 RADIATOR HOSE

    Click here

13. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

14. ADD ENGINE COOLANT

    Click here

15. INSPECT FOR COOLANT LEAK

    Click here

16. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

17. INSTALL LOWER FRONT BUMPER COVER

    Click here

18. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here