НАСОС СИСТЕМЫ ОХЛАЖДЕНИЯ УЗЛЫ И ДЕТАЛИ
Информация добавлена 08-08-2017 
ILLUSTRATION
| *1 | LOWER FRONT BUMPER COVER | *2 | NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
| *3 | UPPER RADIATOR SUPPORT SEAL | *4 | V-BANK COVER SUB-ASSEMBLY |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *1 | FAN SHROUD | *2 | NO. 1 RADIATOR HOSE |
| *3 | NO. 2 RADIATOR HOSE | *4 | OIL COOLER TUBE |
| *5 | RADIATOR RESERVOIR ASSEMBLY | *6 | FAN PULLEY |
| *7 | FLUID COUPLING | *8 | FAN |
| *9 | FAN AND GENERATOR V BELT | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *1 | WATER INLET HOUSING | *2 | NO. 1 WATER BY-PASS HOSE |
| *3 | NO. 2 WATER BY-PASS HOSE | *4 | NO. 3 WATER BY-PASS HOSE |
| *5 | NO. 4 WATER BY-PASS HOSE | *6 | NO. 5 WATER BY-PASS HOSE |
| *7 | NO. 2 OIL COOLER HOSE | *8 | OIL COOLER HOSE |
| *9 | O-RING | *10 | GASKET |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *A | for Separate Type | *B | for Integrated Type |
| *1 | ENGINE WATER PUMP ASSEMBLY | *2 | NO. 2 IDLER PULLEY SUB-ASSEMBLY |
| *3 | VANE PUMP ASSEMBLY | *4 | V-RIBBED BELT TENSIONER ASSEMBLY |
| *5 | IDLER PULLEY COVER PLATE | *6 | NO. 2 IDLER PULLEY COVER PLATE |
| *7 | GASKET | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |