МАСЛЯНЫЙ НАСОС УЗЛЫ И ДЕТАЛИ
Информация добавлена 08-08-2017 
ILLUSTRATION
| *A | for Separate Type | *B | for Integrated Type |
| *1 | ENGINE OIL LEVEL DIPSTICK GUIDE | *2 | IGNITION COIL ASSEMBLY |
| *3 | NO. 1 IDLER PULLEY SUB-ASSEMBLY | *4 | NO. 2 IDLER PULLEY SUB-ASSEMBLY |
| *5 | OIL FILTER BRACKET | *6 | OIL FILTER ELEMENT |
| *7 | V-RIBBED BELT TENSIONER ASSEMBLY | *8 | WATER BY-PASS PIPE SUB-ASSEMBLY |
| *9 | WATER INLET HOUSING | *10 | NGINE OIL LEVEL DIPSTICK |
| *11 | NO. 2 WATER BY-PASS HOSE | *12 | NO. 1 WATER BY-PASS HOSE |
| *13 | NO. 3 WATER BY-PASS HOSE | *14 | O-RING |
| *15 | GASKET | *16 | OIL FILTER CAP |
| *17 | OIL FILTER DRAIN PLUG | *18 | NO. 2 IDLER PULLEY COVER PLATE |
| *19 | IDLER PULLEY COVER PLATE | - | - |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *1 | CYLINDER HEAD COVER SUB-ASSEMBLY | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY LH |
| *3 | FUEL PIPE SUB-ASSEMBLY | *4 | NO. 1 OIL PIPE |
| *5 | NO. 2 OIL PIPE | *6 | REAR CYLINDER HEAD COVER |
| *7 | SEAL WASHER | *8 | CYLINDER HEAD COVER GASKET |
| *9 | GASKET | *10 | NO. 2 CYLINDER HEAD COVER GASKET |
| *11 | OIL CONTROL VALVE FILTER RH | *12 | OIL CONTROL VALVE FILTER LH |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *1 | CRANKSHAFT PULLEY | *2 | FRONT CRANKSHAFT OIL SEAL |
| *3 | NO. 2 OIL PAN SUB-ASSEMBLY | *4 | OIL PAN SUB-ASSEMBLY |
| *5 | OIL STRAINER SUB-ASSEMBLY | *6 | TIMING CHAIN COVER SUB-ASSEMBLY |
| *7 | OIL PUMP GASKET | *8 | O-RING |
| *9 | GASKET | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
 |
MP grease | - | - |
ILLUSTRATION
| *1 | OIL PUMP COVER | *2 | OIL PUMP RELIEF VALVE |
| *3 | TIMING CHAIN COVER SUB-ASSEMBLY | *4 | DRIVEN ROTOR |
| *5 | RELIEF VALVE SPRING | *6 | RELIEF VALVE SPRING |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | - |