ВЫПУСКНОЙ КОЛЛЕКТОР УСТАНОВКА

Информация добавлена 08-08-2017

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

    Click here

  2. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01NBT3C02
      *1 Protrusion
      B001T99 Front

      Install a new gasket to the cylinder head.

      Note

      Be careful of the installation direction.

    2. Temporarily install the exhaust manifold with 6 new nuts.

    3. A01NBM0N01

      Tighten the 6 nuts in the sequence shown in the illustration.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    4. Connect the air fuel ratio sensor connector.

  3. INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. Install the No. 2 exhaust manifold heat insulator with the 3 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  4. INSTALL NO. 2 MANIFOLD STAY


    1. Install the No. 2 manifold stay with the 3 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  5. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

    Click here

  6. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A01NBCPC02
      *1 Protrusion
      B001T99 Front

      Install a new gasket to the cylinder head.

      Note

      Be careful of the installation direction.

    2. Temporarily install the exhaust manifold with 6 new nuts.

    3. A01NAV0N01

      Tighten the 6 nuts in the sequence shown in the illustration.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    4. Connect the air fuel ratio sensor connector.

  7. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. Install the No. 1 exhaust manifold heat insulator with the 3 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  8. INSTALL MANIFOLD STAY


    1. Install the manifold stay with the 3 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  9. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here

  10. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  11. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  12. INSTALL AIR CLEANER CAP AND HOSE

    Click here

  13. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  14. INSTALL RADIATOR SUPPORT SEAL UPPER

    Click here

  15. INSPECT FOR EXHAUST GAS LEAK

    Click here

  16. INSTALL FRONT FENDER APRON SEAL LH


    1. Install the front fender apron seal with the 7 clips.

  17. INSTALL FRONT FENDER APRON SEAL RH


    1. Install the front fender apron seal with the 4 clips.

  18. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH


    1. Install the front No. 1 fender apron to frame seal with the 5 clips.

  19. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL RH


    1. Install the front No. 1 fender apron to frame seal with the 5 clips.