ТОПЛИВНЫЙ НАСОС РАЗБОРКА

Информация добавлена 08-08-2017

CAUTION / NOTICE / HINT

Note

Do not disconnect the hoses indicated in the illustration.

A01HKP1

PROCEDURE


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  2. REMOVE NO. 1 FUEL SUB-TANK


    1. A01HL7W

      Disconnect the fuel pump connector.

    2. A01HLG3C01
      *1 Jet Pump
      *2 Protective Tape

      Disconnect the jet pump from the No. 1 fuel sub-tank.

    3. Remove the tube part from the No. 1 fuel sub-tank.


      1. Disconnect the tube from the 2 clamps on the No. 1 fuel sub-tank.

      2. Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.

        Note

        Do not damage the No. 1 fuel sub-tank.

        Tech Tips

        Tape the screwdriver tip before use.

    4. A01HLN4

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the No. 1 fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01HL1Q

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the No. 1 fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FUEL PUMP


    1. A01HKJGC03
      *1 Fuel Filter Case

      Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

    3. A01HKW7C02
      *1 O-Ring
      *2 Fuel Pump Spacer

      Remove the O-ring and fuel pump spacer from the fuel pump.

  4. REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A01HLJ1C02
      *1 Fuel Filter Case
      *2 O-Ring

      Remove the fuel main valve from the fuel filter case.

    2. Remove the 2 O-rings from the fuel main valve.