ТОПЛИВНЫЙ НАСОС СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. REMOVE FUEL TANK SUB-ASSEMBLY

    Click here

  2. REMOVE FUEL TANK CUSHION

    Click here

  3. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL RETURN TUBE SUB-ASSEMBLY

    Click here

  4. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. A01A5UQN02

      Set SST on the fuel pump gauge retainer.

      SST
      09808-14030

      Tech Tips


      • Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

      • Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).

    2. A01A5OCC01
      B001T99 Turn

      Using SST, loosen the retainer.

      SST
      09808-14030

      Note


      • When the retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.

      • Remove any foreign matter around the fuel suction with pump and gauge tube before this operation.

      Tech Tips

      Fit the tips of SST onto the ribs of the retainer.

    3. Remove the retainer.

    4. Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

      Note

      Be careful not to bend the arm of the fuel sender gauge.

    5. Remove the gasket from the fuel tank.