ДЕМПФЕР ПУЛЬСАЦИЙ ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INTAKE AIR SURGE TANK

    Click here

  5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. B001UKO

      Remove the fuel pressure regulator holder.

    2. Pull the fuel pressure pulsation damper out of the fuel delivery pipe.

    3. Remove the O-ring from the fuel pressure pulsation damper.