РЕГУЛЯТОР ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ УСТАНОВКА

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   
   1. 

      *1

      O-Ring

      Apply a light coat of spindle oil or gasoline to the O-ring.

      Note

      
      

      • When reusing the fuel pressure regulator, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the fuel pressure regulator.

   2. Install the fuel pressure regulator with the 2 bolts.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   3. Connect the vacuum hose.

2. CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

   Click here

3. INSTALL INTAKE AIR SURGE TANK

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

5. INSPECT FOR FUEL LEAK

   Click here