РЕГУЛЯТОР ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ СНЯТИЕ

PROCEDURE

1. DISCHARGE FUEL SYSTEM PRESSURE

   Click here

2. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE INTAKE AIR SURGE TANK

   Click here

5. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

   Click here

6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. Disconnect the vacuum hose.

   2. 

      Remove the 2 bolts and fuel pressure regulator.