БЛОК ДВИГАТЕЛЯ УСТАНОВКА

PROCEDURE

1. INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET RH

   
   

   1. Install the front No. 1 engine mounting bracket RH with the 4 bolts.

      Torque:

      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

2. INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET LH

   
   

   1. Install the front No. 1 engine mounting bracket LH with the 3 bolts.

      Torque:

      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

3. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

   Click here

4. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

   Click here

5. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

   Click here

6. INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY

   Click here

7. INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY

   Click here

8. INSTALL INTAKE MANIFOLD

   Click here

9. INSTALL FUEL INJECTOR ASSEMBLY

   Click here

10. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

11. INSTALL FUEL PIPE SUB-ASSEMBLY

    
    

    1. Install the No. 1 fuel pipe and No. 2 fuel pipe with the 2 bolts.

       Torque:

       9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    2. Connect the 2 fuel pipes Click here.

12. INSTALL REAR CYLINDER HEAD COVER

    Click here

13. INSTALL IGNITION COIL ASSEMBLY

    Click here

14. INSTALL HEATER WATER HOSE ASSEMBLY

    
    

    1. Install the heater water hose assembly and connect the 3 hoses.

15. INSTALL ENGINE WIRE