ПРИВОДНОЙ РЕМЕНЬ УСТАНОВКА

Информация добавлена 08-08-2017

PROCEDURE


  1. INSTALL FAN AND GENERATOR V BELT


    1. B001U2NC01
      *1 Vane Pump
      *2 Engine Water Pump
      *3 No. 2 Idler
      *4 Generator
      *5 Cooler Compressor
      *6 No. 1 Idler
      *7 Crankshaft
      *8 V-ribbed Belt Tensioner

      Set the fan and generator V belt onto every part.

    2. While turning the belt tensioner counterclockwise, remove the bar.

      Note

      Make sure that the fan and generator V belt is properly installed to each pulley.

    3. Check that the belt fits properly in the ribbed grooves.

      Tech Tips

      Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.

  2. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  3. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here