ЗАДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

Информация добавлена 08-08-2017

PROCEDURE


  1. INSTALL REAR CRANKSHAFT OIL SEAL


    1. B001SRZN01

      Apply MP grease to the lip of a new oil seal.

    2. Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

      SST
      09223-78010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap the oil seal at an angle.v

  2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click here

  3. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

    Click here