ЗАДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

Информация добавлена 08-08-2017

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click here

  3. REMOVE REAR CRANKSHAFT OIL SEAL


    1. B001PUDC01
      *1 Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Note

      Do not damage the surface of the oil seal press fit hole or crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.