LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch to on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus:


        1. for Illuminated Entry: Body / Main Body / Utility / Customize / Illuminated Entry.

        2. for Light Control: Body / Main Body / Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.

        Illuminated Entry
        Display Default Content Setting Relevant ECU
        Mirr-Foot-Lgt Approached ON Lights up the door mirror foot lights when a key enters any actuation area around the doors. ON or OFF Main Body ECU (Multiplex Network Body ECU)
        Mirr-Foot-Lgt Unlocked ON Lights up the door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
        Mirr-Foot-Lgt w/Master SW ON

        • Lights up the door mirror foot lights when the driver side door control switch on the multiplex network master switch assembly is pushed to the unlock position.

        • Lights up the door mirror foot lights when the front passenger side door control switch on the power window regulator switch assembly is pushed to the unlock position.

        		 ON or OFF
        Mirror Foot Lighting Time 15 s Changes the lighting time of the door mirror foot lights. 7.5 s, 15 s, 30 s or 0 s*1
        Exterior Light Control ON Changes the door mirror foot light control. ON or OFF

        • *1: Even if "0 s" is selected, it can not be set.

        Light Control
        Display Default Content Setting Relevant ECU
        Response Time*1 Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position Normal or Long Main Body ECU (Multiplex Network Body ECU)
        Sensitivity Normal Adjusts the sensitivity of the automatic light control system. Light2, Light1, Normal, Dark1 or Dark2
        DRL Function ON ON/OFF of the DRL function ON or OFF
        Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock. Light2, Light1, Normal, Dark1 or Dark2
        Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock. Light2, Light1, Normal, Dark1 or Dark2

        • *1: w/o Light Reminder

    2. Customizing with the Multi-display


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Light settings.

      3. Select the setting by referring to the table below.

        Light settings
        Display Default Content Setting Relevant ECU
        Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*1 -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Daytime running lights On ON/OFF of the DRL function On or Off
        Exterior lights off timer 15 sec. Changes the lighting time of the door mirror foot lights. Off, 7.5 sec., 15 sec. or 30 sec.

        • *1: The higher the setting value is, the more the lights come on easily.

    3. Customizing with the Combination meter assembly

      Tech Tips


      • Press and hold DISP (steering pad switch) when entering an item.

      • Briefly press DISP (steering pad switch) when selecting an item.


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETTINGS / VEHICLE SETTINGS.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        LIGHT SENSOR SENSITIVITY 0 (Standard) Adjusts the sensitivity of the automatic light control system.*1 -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)
        DAYTIME RUNNING LIGHTS ON ON/OFF of the DRL function ON or OFF
        EXTERIOR LIGHTS OFF TIME ADJUSTMENT 15 s Changes the lighting time of the door mirror foot lights. 7.5 s, 15 s, 30 s or OFF*2

        • *1: The higher the setting value is, the more the lights come on easily.

        • *2: Even if "OFF" is selected, it can not be set.