WASHER LEVEL WARNING SWITCH INSTALLATION


  1. INSTALL LEVEL WARNING SWITCH ASSEMBLY


    1. A003XIA

      Install the level warning switch assembly.

    2. Connect the connector.

    3. A003ZSO

      Connect the washer hose.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. Install the front fender liner RH with the 6 clips and 6 screws.

    2. Install the bolt.

    3. Install 2 new grommets.

    4. Using a 4 mm hexagon wrench, install the 3 screws.

    5. A003Z7WE01
      Text in Illustration
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }