WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER LINER RH


    1. A003XBFE01

      Using a screwdriver, turn each pin 90 degrees counterclockwise and remove the 2 pin hold clips.

    2. A003VN9

      Using a 4 mm hexagon wrench, remove the 3 screws.

    3. A003WD4E01

      Remove the 6 screws and bolt.

    4. Remove the 6 clips and 2 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

      Text in Illustration
      *1 Grommet

  3. DRAIN WASHER FLUID


    1. A003XVP

      Disconnect the washer hose from the rear washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A003Z9C

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.