WASHER NOZZLE (for Front Side) INSTALLATION


  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. A003W5LE01

      Engage the 2 claws to install the washer nozzle sub-assembly as shown in the illustration.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the power switch on (READY), check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A003Z6RE01
      Standard Clearance
      Area Measurement Area Measurement
      A 122.2 mm (4.811 in.) B 462.9 mm (1.52 ft.)
      C 192.4 mm (7.575 in.) D 36.8 mm (1.449 in.)
      Text in Illustration
      *1 Upper Limit *2 Standard
      *3 Lower Limit - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.

  3. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A003ZDCE01