WIPER AND WASHER SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING THE AUXILIARY BATTERY CABLE

    Note

    When disconnecting the auxiliary battery negative (-) cable, initialize the following system after the cable is reconnected:

    System See Procedure
    Parking Assist Monitor System

    Click here

    Power Door Lock Control System

  2. PRECAUTION OF WASHER NOZZLE ADJUSTMENT


    1. Do not clean or adjust the washer nozzle with a safety pin, etc. because:


      1. The washer nozzle tip is made of resin and could be damaged.

      2. Adjustment is not necessary for this spray type washer nozzle (for Front Side). If it is necessary to change the nozzle angle, replace the washer nozzle (for Front Side) with one that has a different nozzle angle.

    2. If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.