WIPER SWITCH INSTALLATION


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A003YNZ

      Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

    2. Connect each connector.

  2. INSTALL STEERING COLUMN COVER

    Note

    If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the steering column cover.


    1. Engage the 2 claws to install the upper steering column cover.

    2. Engage the 4 clips and 2 guides to install the instrument panel cluster finish panel to the upper steering column cover.

    3. A003WSD

      Engage the 4 claws.

    4. A003Z36

      Engage the 2 claws.

      Tech Tips

      Press the area around the claws to engage them.

    5. Turn the steering wheel assembly to the left to install the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    6. Turn the steering wheel assembly to the right to install the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }