OUTER REAR VIEW MIRROR INSPECTION

INSPECT OUTER MIRROR ACTUATOR ASSEMBLY RH (w/ Memory)

1. 

   Text in Illustration

   *a	Component without harness connected (Outer Mirror Actuator Assembly RH)

   Inspect outer mirror motor operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table and illustration.

      Standard

      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 (RMVR) Auxiliary battery negative (-) → Terminal 10 (RM+R) Turns upward (A) Auxiliary battery positive (+) → Terminal 10 (RM+R) Auxiliary battery negative (-) → Terminal 1 (RMVR) Turns downward (B) Auxiliary battery positive (+) → Terminal 9 (RMHR) Auxiliary battery negative (-) → Terminal 10 (RM+R) Turns left (C) Auxiliary battery positive (+) → Terminal 10 (RM+R) Auxiliary battery negative (-) → Terminal 9 (RMHR) Turns right (D)

      If the result is not as specified, replace the outer mirror actuator assembly RH.

2. Inspect outer mirror heater operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table below.

      Standard
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 4 (HTR+) Auxiliary battery negative (-) → Terminal 12 (HTR-) Mirror surface temperature becomes higher

      If the result is not as specified, replace the outer rear view mirror assembly RH.

INSPECT OUTER MIRROR ACTUATOR ASSEMBLY LH (w/ Memory)

1. 

   Text in Illustration

   *a	Component without harness connected (Outer Mirror Actuator Assembly LH)

   Inspect outer mirror motor operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table and illustration.

      Standard

      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 (LMVR) Auxiliary battery negative (-) → Terminal 10 (LM+R) Turns upward (A) Auxiliary battery positive (+) → Terminal 10 (LM+R) Auxiliary battery negative (-) → Terminal 1 (LMVR) Turns downward (B) Auxiliary battery positive (+) → Terminal 9 (LMHR) Auxiliary battery negative (-) → Terminal 10 (LM+R) Turns left (C) Auxiliary battery positive (+) → Terminal 10 (LM+R) Auxiliary battery negative (-) → Terminal 9 (LMHR) Turns right (D)

      If the result is not as specified, replace the outer mirror actuator assembly LH.

2. Inspect outer mirror heater operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table below.

      Standard
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 4 (HTR+) Auxiliary battery negative (-) → Terminal 12 (HTR-) Mirror surface temperature becomes higher

      If the result is not as specified, replace the outer rear view mirror assembly LH.

INSPECT OUTER MIRROR ACTUATOR ASSEMBLY RH (w/o Memory)

1. 

   Text in Illustration

   *a	Component without harness connected (Outer Mirror Actuator Assembly RH)

   Inspect outer mirror motor operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table and illustration.

      Standard

      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 (MV) Auxiliary battery negative (-) → Terminal 10 (M+) Turns upward (A) Auxiliary battery positive (+) → Terminal 10 (M+) Auxiliary battery negative (-) → Terminal 1 (MV) Turns downward (B) Auxiliary battery positive (+) → Terminal 9 (MH) Auxiliary battery negative (-) → Terminal 10 (M+) Turns left (C) Auxiliary battery positive (+) → Terminal 10 (M+) Auxiliary battery negative (-) → Terminal 9 (MH) Turns right (D)

      If the result is not as specified, replace the outer mirror actuator assembly RH.

2. Inspect outer mirror heater operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table below.

      Standard
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 4 (+) Auxiliary battery negative (-) → Terminal 12 (-) Mirror surface temperature becomes higher

      If the result is not as specified, replace the outer rear view mirror assembly RH.

INSPECT OUTER MIRROR ACTUATOR ASSEMBLY LH (w/o Memory)

1. 

   Text in Illustration

   *a	Component without harness connected (Outer Mirror Actuator Assembly LH)

   Inspect outer mirror motor operation.

   
   

   1. Remove the outer rear view mirror assembly LH.

   2. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table and illustration.

      Standard

      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 (MV) Auxiliary battery negative (-) → Terminal 10 (M+) Turns upward (A) Auxiliary battery positive (+) → Terminal 10 (M+) Auxiliary battery negative (-) → Terminal 1 (MV) Turns downward (B) Auxiliary battery positive (+) → Terminal 9 (MH) Auxiliary battery negative (-) → Terminal 10 (M+) Turns left (C) Auxiliary battery positive (+) → Terminal 10 (M+) Auxiliary battery negative (-) → Terminal 9 (MH) Turns right (D)

      If the result is not as specified, replace the outer mirror actuator assembly RH.

2. Inspect outer mirror heater operation.

   
   

   1. Apply auxiliary battery voltage and check the operation of the mirror face as shown in the table below.

      Standard
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 4 (+) Auxiliary battery negative (-) → Terminal 12 (-) Mirror surface temperature becomes higher

      If the result is not as specified, replace the outer rear view mirror assembly RH.