REAR WIPER RUBBER REPLACEMENT


  1. REMOVE REAR WIPER BLADE


    1. A003X67

      Raise the wiper blade to the position where the claw detaches with a click sound as shown in the illustration.

      Note

      Be careful not to damage the claw.

    2. A003WTC

      Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.

      Note

      Do not lower the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

  2. REMOVE REAR WIPER RUBBER


    1. A003Y9ZE01
      Text in Illustration
      *1 Stopper
      *a Lightly Push
      *b Lift
      *c Pull

      Lift and pull the end of the wiper rubber protrusion from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

      Tech Tips

      Lightly pushing the rubber in the middle will allow it to be removed more easily.

    2. Remove the rear wiper rubber backing plates.

  3. INSTALL REAR WIPER RUBBER


    1. A003W9Y

      Install the rear wiper rubber backing plates as shown in the illustration.

      Note

      Install the backing plates facing the correct direction.

    2. A003VKA

      Insert the wiper rubber from the front end of the wiper blade to the rear end through the second claw.

    3. After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.

    4. A003VTX

      Slide the wiper rubber through the front end claw.

    5. A003Y78

      Confirm that the claws of the rear wiper blade are correctly inserted into the grooves of the rear wiper rubber.

  4. INSTALL REAR WIPER BLADE


    1. A003WLD

      Push the wiper blade straight toward the right side of the vehicle to install it to the wiper arm.

    2. A003WBS

      Engage the claw to install the rear wiper blade as shown in the illustration.

      Note

      Be careful not to damage the claw.