REAR WIPER MOTOR REMOVAL


  1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A003X12

      Using a moulding remover, disengage the 4 clips and 4 claws, and remove the upper back door trim panel assembly.

  2. REMOVE BACK DOOR SIDE GARNISH LH


    1. A003XEI

      Disengage the 2 clips, 2 claws and guide, and remove the back door side garnish LH.

  3. REMOVE BACK DOOR SIDE GARNISH RH


    1. A003VMK

      Disengage the 2 clips, 2 claws and guide, and remove the back door side garnish RH.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A003ZUJ

      Using a screwdriver with its tip wrapped in protective tape, slide the handle plate of the back door trim board to disengage it.

    2. A003XVH

      Disengage the 13 clips and remove the back door trim board assembly.

  5. REMOVE REAR WIPER ARM HEAD CAP


    1. A003VUFE02

      Disengage the 2 claws (A) and open the rear wiper arm head cap as shown in the illustration.

    2. Disengage the 2 claws (B) and remove the rear wiper arm head cap.

  6. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A003Y29

      Remove the nut and the rear wiper arm and blade assembly.

  7. REMOVE REAR WIPER MOTOR GROMMET


    1. A003Y1A

      Remove the rear wiper motor grommet.

  8. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A003XK5

      Disconnect the connector.

    2. Remove the 3 bolts and the rear wiper motor assembly.