WIPER SWITCH REMOVAL


  1. REMOVE STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. A003Y14

      Turn the steering wheel assembly to the left and remove the screw.

    4. A003ZG6

      Turn the steering wheel assembly to the right and remove the screw.

    5. A003WSD

      Push the right and left sides of the lower steering column cover to disengage the 4 claws.

    6. A003Z36

      Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the 2 claws.

      Tech Tips

      Spread the claws to disengage them.

    7. A003VNX

      Disengage the 4 clips and 2 guides to separate the instrument panel cluster finish panel from the upper steering column cover.

    8. A003ZWE

      Disengage the 2 claws and remove the upper steering column cover.

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A003YS6

      Disconnect each connector.

    2. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pushed with excessive force, it may break.