FUEL LID OPENER MOTOR ASSEMBLY INSPECTION


  1. INSPECT FUEL LID WITH MOTOR LOCK ASSEMBLY


    1. A003W3EE01
      Text in Illustration
      *a

      Component without harness connected:

      (Fuel Lid with Motor Lock Assembly)
      *b Open
      *c Shaft Stroke

      Apply auxiliary battery voltage to the motor terminals and check that the motor operates and the shaft moves in the open direction.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2

      Auxiliary battery negative (-) → Terminal 1

      		 Motor operates and shaft moves in open direction

    2. Measure the shaft stroke.

      Standard
      9.9 mm (0.390 in.) or more

      If the result is not as specified, replace the motor assembly.