HOOD DISASSEMBLY


  1. REMOVE HOOD TO RADIATOR SUPPORT SEAL


    1. A003X63

      Using a clip remover, disengage the 4 clips and remove the hood to radiator support seal.

  2. REMOVE HOOD INSULATOR


    1. A003VXY

      Using a clip remover, remove the 7 clips.

    2. Disengage the 2 claws and remove the hood insulator.

  3. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A003ZJ2E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A003Y1Y

      Remove the washer nozzle sub-assembly from the washer hose.

      Note

      Washer nozzles cannot be reused.

  4. DISCONNECT WASHER HOSE ASSEMBLY


    1. A003VKF

      Disengage the 6 clips and disconnect the washer hose assembly.