HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas *a through *e are within each standard range.

      A003X1EE01
      Standard Clearance
      Area Measurement Area Measurement
      *a 3.3 to 7.3 mm (0.130 to 0.287 in.) *b -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
      *c 5.65 to 9.65 mm (0.222 to 0.380 in.) *d 2.5 to 5.5 mm (0.0984 to 0.217 in.)
      *e -0.6 to 2.4 mm (-0.0236 to 0.0945 in.) - -