Click here

POWER WINDOW MASTER SWITCH INSPECTION

Click here
Click here
  1. Click here

    INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A003XU7E06

      Check that the LED illuminates.


      1. Apply battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 18 (LED)

        Battery negative (-) → 12 (GND)

        		 LED illuminates
        Table 1. Text in Illustration
        *A for LHD
        *B for RHD
        *a

        Component without harness connected

        (Multiplex Network Master Switch Assembly)
        *b LED

        If the result is not as specified, replace the multiplex network master switch assembly.